|
FEATURES
 FRAME-
Constructed from 4"x 4"x 1/2" angle and 4"x 4"x 3/8" square tubing.
Heavy-duty 3/4" welded a-frame.
GANGS-
3"x5"x3/8" tubular gang carriers provide rigid support for gang
components.
ANGLE
OF CUT - Adjustments from 0 degrees to 23 degrees are fast and
easy.
DISC
BLADES - Blades are made in USA from the Highest quality steel for
strength and durability |
Width
of Cut |
No. of
Blades |
Disc
Spacing |
No. of
Bearings |
Min. Req.
HP* |
Approx.
Weight |
| 6'4" |
16 |
9 |
8 |
60 |
1950 |
| 8' |
16 |
10-1/2 |
8 |
60 |
2075 |
| 9'6" |
20 |
10-1/2 |
8 |
80 |
2250 |
| 9'6" |
24 |
9 |
8 |
80 |
2400 |
| 10'6" |
24 |
10-1/2 |
8 |
100 |
2500 |
*Approximate horsepower, to be used as a guide. Extremely soft, hard or boggy conditions will change these figures
|
Oliver & Dahlman Equipment Co. Reserves the
right to change the design, material and specifications of its products
without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment. |
Standard Equipment
- 24" x 1/4" Discs (USA)
- 9" of 10 1/2" Disk Spacing
- Sealed Flange Bearings on 10-1/2" Spacing and Pillow
Block Bearings on 9" Spacing
- Heavy-duty Disc Scrapers
OPTIONAL EQUIPMENT
- 22" X 1/4" Discs
- 24" x 5/16" Discs
- 26" x 1/4" Discs
- 26" X 5/16" Discs
|
