Oliver & Dahlman Equipment Co.

FEATURES

FRAME
Constructed from 4 x 6 x 3/4 angle and 4 x 4 x 3/8 square tubing. Tongue is 3 x 6 x 3/8 and a 4 x 4 x 3/8 drawbar with heavy duty spring bundle for front to rear leveling.

Width of Cut	No. of Blades	Disc Spacing	No. of Brgs	Min Req. HP*	Approximate Weight
6'4"	16	9	8	50	1650
6'8"	20	7 1/2	8	50	1700
6'8"	18	9-7 1/2	8	50	1700
8"	24	7-1/2	8	60	2000
8'	20	9	8	60	1900
8'	22	9-7 1/2	8	75	1950
9'6"	24	9	8	75	2750
9'6"	26	9-7 1/2	8	75	2850
10'6"	28	9	8	85	3000
10'6"	30	9-7 1/2	10	85	3050
12'	32	9	12	95	3350
12'	36	9-7 1/2	12	95	3350
12'	40	7 1/2	12	95	3525
13'4"	36	9	12	100	3500
14'	40	9	12	110	3600
15'	40	9	16	115	3800

*Approximate horsepower, to be used as a guide. Extremely soft, hard or boggy conditions will change these figures

GANGS
3 x 6 x 3/8 gang carriers provide rigid support for gang components.

AXLES
Made from high strength 1-1/8" square alloy steel.

ANGLE OF CUT
Adjustments from 5° to 28°.

DISC BLADES
Blades are made in USA from the highest quality steel for strength and durability.

BEARINGS
Re-lubricate flangette or optional pillow block bearing assemblies.

STANDARD EQUIPMENT

22"x3/16" Discs (USA Made)
7 1/2" and 9" Disc Spacing
Hydraulic Lift Cylinder w/hoses
Hydraulic Control Group on Folding Models
Single 11Lx15 Tires (dual wheels on 32-40 blade units)
Heavy-duty Disc Scrapers

OPTIONAL EQUIPMENT

22" x 1/4" Discs
24" x 1/4" Discs
Pillow block bearing assemblies

Oliver & Dahlman Equipment Co. reserves the right to change the design, material and specifications of its products without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.